Seam Repair — Family-owned, 4.9★ rated, 15-year warranty
Your putting green in Chattahoochee Hills took a beating—maybe a seam came loose, or the backing started separating from the base. It happens, especially on those rolling South Fulton lots where drainage and ground settling work against you. The good news is that seam repair doesn't mean ripping out your entire installation and starting fresh. We've handled plenty of these fixes across Serenbe and the Rico area, where estate properties have the space for quality greens but also deal with the clay-heavy soil and humidity that Georgia throws at you. A separated seam usually means the adhesive bond weakened—could be installation shortcuts, could be drainage issues underneath pushing moisture where it shouldn't go, or sometimes just normal wear from years of foot traffic. The fix is straightforward: we cut out the damaged section, prep the base properly, and re-seam with industrial-grade adhesive that actually holds in Georgia's climate. Most repairs take a day, and your green is back to tournament-ready condition.
Chattahoochee Hills sits on those classic South Fulton rolling hills with clay-dominant soil that drains differently than sandy areas up north. That matters for your putting green because poor drainage underneath is one of the top reasons seams fail—water gets trapped, the base shifts slightly, and adhesive bonds break down. When we install or repair greens here, we always confirm the subsurface drainage is working. Lot sizes in Serenbe and Rico tend to be generous, which is great for green placement, but it also means your turf might experience varied sun exposure depending on tree coverage and slope. The afternoon heat and humidity in summer can stress seams that weren't installed with Georgia's specific climate in mind. Serenbe has some HOA landscape standards, so if your putting green is visible from common areas or neighboring properties, we make sure the repair blends seamlessly with the original installation. We also account for the clay base—it doesn't compact the same way as sand or loam, so we adjust our prep work accordingly to prevent future separation.
The South Fulton clay soil drains differently than other regions, and if subsurface water isn't managed correctly, it creates pressure under the turf that separates seams. Summer humidity and temperature swings also stress adhesive bonds. Poor installation practices—cutting corners on base prep or using lower-grade seam adhesive—accelerate failure, especially in our rolling terrain where ground settling is common.
One seam? Absolutely. We cut out the damaged section, expose the base, clean and prep it properly for Georgia's clay soil conditions, then re-seam with industrial adhesive. The repair takes a day and costs a fraction of a full reinstall. If multiple seams are failing across the green, we'd discuss a larger restoration, but isolated seam separation is our bread and butter.
Most repairs are completed in a single day. We work methodically—cutting, base prep, adhesive application, seam welding, and curing time. Depending on the seam length and base condition, expect four to six hours of active work. We'll schedule you so the repair is finished before evening, and the adhesive sets fully overnight.
Yes. We use matching turf and adhesive to blend the repair seamlessly. If your green was installed five years ago, the turf color and pile might have faded slightly; we account for that. The goal is a repair that's invisible to the eye and built to last just as long as the original installation.
Call (706) 701-8873 or visit instant.lawnlogicturf.com — 60-second quotes, no pressure.