Infill Types — Family-owned, 4.9★ rated, 15-year warranty
Building a sport court in Hapeville means working with what Mother Nature gave you—and in South Fulton County, that's dense clay soil and tight residential lots, especially around the Porsche area and Downtown Hapeville neighborhoods. We've installed plenty of courts in compact urban yards where drainage matters and ground prep is half the battle. The infill you choose for your artificial turf sport surface directly affects how the court performs, how long it lasts, and honestly, how much maintenance you'll be doing on weekends. Sand-based infill, rubber crumb, and hybrid systems all behave differently depending on your soil conditions and how much sun your yard gets. Since we're based just 30 minutes away, we've seen firsthand what works in Fulton County clay and what turns into a muddy mess come summer. This guide walks you through the infill options that actually make sense for Hapeville yards—no generic advice, just what we've learned from installing courts in neighborhoods just like yours.
Hapeville's South Fulton clay is compact and doesn't drain naturally, which means your sport court needs an infill system that won't trap water underneath. We always recommend starting with a proper sub-base—crushed stone and drainage fabric—because that clay will hold moisture otherwise. Most yards in the Porsche area and Downtown Hapeville are modest in size, so you're looking at court dimensions that fit snugly, which makes infill choice even more critical since water has nowhere to escape if the base isn't right. Sun exposure varies block to block; some lots get hammered all day, others stay shaded by the mix of trees and nearby structures. Rubber crumb infill heats up faster in direct sun—sometimes noticeably—while sand-based systems stay cooler but compact over time on clay. Hybrid infill splits the difference. HOA rules in some Hapeville neighborhoods specify finished height or appearance, so confirm your community guidelines before installation. We factor in seasonal humidity and occasional heavy rain when sizing drainage requirements; underestimating either one leads to standing water and premature wear.
Hybrid infill works best for us locally. It combines rubber crumb for cushioning with sand for stability and drainage—crucial on South Fulton clay that doesn't naturally shed water. Sand-only infill compacts too much on clay and traps moisture; pure rubber crumb can get hot in summer and migrate on slopes. Hybrid gives you the balance Hapeville yards need.
In Hapeville's climate, expect to rake or brush the court every 4–6 weeks during heavy-use months. Clay soil underneath means water sits longer, so infill can migrate toward low spots. Summer humidity and occasional storms accelerate this. We recommend a drag broom and lightweight rake—nothing that tears the turf mat.
Absolutely. Rubber crumb heats up in direct sun—surface temps can hit 110–120°F on hot Hapeville days. Sand-based infill runs 10–15°F cooler. Hybrid infill sits in the middle. If your yard is mostly sunny (common in the Porsche area), hybrid or sand-based feels better underfoot, especially for kids playing in afternoon heat.
Yes, with proper prep. We excavate slightly, install crushed stone and drainage fabric to handle that clay underneath, then lay the turf mat and infill. The key is getting the base right first—shortcutting this step in Hapeville yards leads to standing water and turf failure. It takes extra time but prevents costly repairs.
Call (706) 701-8873 or visit instant.lawnlogicturf.com — 60-second quotes, no pressure.