Pile Height Guide — Family-owned, 4.9★ rated, 15-year warranty
Pool season in Lilburn runs long—from late spring straight through September—and that means your pool deck takes a beating. Concrete gets slippery, hot underfoot, and cracks under the Georgia sun. Artificial turf changes that equation entirely. Instead of scorching pavement around your pool at Lilburn City Park or in the Killian Hill neighborhoods, you get soft, safe ground that stays cool and doesn't fade. We've installed turf around dozens of pools across Gwinnett County, and Lilburn homeowners consistently tell us the same thing: they wish they'd done it sooner. The mature suburban lots around here—whether you're near Yellow River or closer to the city center—have the space to really benefit from turf poolside. It transforms your backyard from a maintenance hassle into an actual gathering spot. No more chlorine stains on concrete, no more algae growth, no more worrying about kids slipping on wet deck. Just a clean, green, usable space that handles humidity and heavy foot traffic without breaking down.
Lilburn sits on heavy Gwinnett clay, which affects both drainage and how we approach turf installation around pools. That clay base means standing water isn't your friend—so we always build in proper slope and perimeter drainage when we install pool-adjacent turf. Most of the neighborhoods here have mature trees, especially toward Lilburn City Park, which creates dappled shade patterns throughout the day. Full-sun pool decks (you'll find plenty of those in the newer sections near Killian Hill) need a turf pile rated for UV resistance and high foot traffic. We typically recommend 15mm to 20mm pile height for pool areas—tall enough to feel comfortable barefoot, but short enough to dry quickly after splashing. The humid Gwinnett summers mean mildew can creep in if drainage isn't perfect, so we pay special attention to sub-base preparation. Lot sizes in Lilburn vary widely, from tight urban lots to spacious suburban properties, so we customize the deck footprint to match your actual space. HOA rules here tend to be reasonable about artificial surfaces, especially when they're clearly functional around a pool, but we always advise checking your covenants first.
We typically go with 15mm to 20mm for pool areas. That height gives you comfort underfoot without trapping water or drying too slowly in our humid summers. Shorter pile (under 12mm) can feel harsh; taller turf holds moisture longer, which isn't ideal around chlorinated water. The 15-20mm sweet spot balances comfort, drainage, and durability for the high foot traffic pool decks see.
Yes—clay holds water, so we always install a solid perimeter drain and slope the turf away from your pool. Without it, water pools under the turf surface, especially after heavy summer storms. We typically use a engineered sub-base with gravel and a drainage layer to keep moisture moving away from the turf root system and your pool equipment.
Chlorine itself isn't a problem, but accumulated salt and mineral buildup can stress turf over time. We recommend rinsing the turf occasionally with fresh water if you have a saltwater system. Traditional chlorine pools are even easier—just occasional rinses keep it fresh. The turf itself won't degrade from chemical exposure the way wood or concrete does.
With proper drainage underneath, pool-area turf dries within 1-2 hours in Lilburn's warm weather. Our 15-20mm pile height drains faster than longer residential turf. Rainy summers do slow it down temporarily, but that clay-base drainage system we install means water moves through and away, not into your yard.
Call (706) 701-8873 or visit instant.lawnlogicturf.com — 60-second quotes, no pressure.